Merge Mode; End Of Message Parameter - Oce 9300 User Manual

Select the required pen priority using the
10
Press 'next/select' to confirm the selected pen priority.
11
Press 'Program' to exit the main menu
12

Merge mode

This option determines what happens when two or more colors intersect at the
same point of a plot, especially in area fills. The default setting is 'On'.
Merge Off
other colors specified for the same line or area are transparent.
Merge On
Setting the merge mode
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select '
10
Press 'next/select' to confirm the selected setting.
11
Press 'Program' to exit the main menu.
12

End of Message parameter

The End of Message (EOM) parameter is significant in all cases in which the
CalComp format is selected or auto-recognized, and select format is set to
Auto or a remote control command for CalComp has been sent.
The range of permitted values is 0 to 31
the decimal equivalent of the byte indicating the end of the data sequence. It
should be a unique character from the character set used to encode the data.
The default EOM is 3.
Customizing defaults
Only the last color specified is printed for a given line or area. The
All the specified colors are blended together.
ONFIGURATION
' item using the
DATA FORMAT
CALCOMP SETUP
' item using the
MERGE
' or ' ' using the
YES NO
or
' item using the
ONFIGURATION
or
' menu.
DATA FORMAT
' item using the
CALCOMP SETUP
or button.
' menu.
MERGE
or button.
inclusive. The selected value is
DEC
button.
or button.
' menu.
button.
or button.
' menu.
63