Bitmap Buffer - Oce 9300 User Manual

Bitmap buffer

This buffer defines a percentage of the total RAM memory that can be used as
the bitmap partition. This value will be set between two values, depending on
the RAM configuration.
The installed RAM can be divided into the following sections:
Bitmap partition
Processing area for files
The size of the bitmap partition determines the max. dimensions of the image
to be printed (e.g. 18 Mb = A0).
The size of the vector processing area determines the ability of the printer to
process complex files (e.g. larger number of vectors).
A high-percentage allocation to the bitmap partition allows printing of long
plots without windowing.
A low-percentage allocation to the bitmap partition enhances your ability to
process very complex files (vector and raster).
Setting the bitmap buffer
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the required bitmap partition using the
8
Press 'next/select' to confirm the required partition.
9
Press 'Program' to leave the main menu.
10
Installing the printer
' item using the
ONFIGURATION
' item using the
BUFFERS
' item using the
BITMAP BUFFER
or
' menu.
ONFIGURATION
or button.
' menu.
BUFFER
or
' menu
BITMAP BUFFER
or
button.
button.
button
23