Oce 9300 User Manual page 31

Remove the roll holder (see figure 11).
2
[11] Removing the roll holder from the lower compartment
While pressing the knob, remove the empty core from the roll holder (see
3
figure 7 on page 28).
While pressing the knob, slide the roll holder into the roll of print material (see
4
figure 7 on page 28).
Make sure that the knob is to the right, and that the paper appears as shown in
figure 7.
While pressing the knob, align the roll with the appropriate lines on the roll
5
holder.
Place the roll holder with the material in the lower paper compartment (see
6
figure 12).
[12] Repositioning the roll
(Re)load media and toner 31