Calcomp Step Size - Oce 9300 User Manual

CalComp step size

If the data format type is set to CalComp (manual, auto selection, or remote
control command), seven steps or increments are provided (100 dpi to 4064
dpi). The default is 2032.
Setting the appropriate step size
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required value using the
10
Press 'next/select' to confirm the selected value.
11
Press 'Program' to exit the main menu.
12
66 Océ 9300 User Manual
' item using the
ONFIGURATION
' item using the
DATA FORMAT
' item using the
CALCOMP SETUP
' item using the
STEP SIZE
or
' menu.
ONFIGURATION
or
' menu.
DATA FORMAT
or
'menu.
CALCOMP SETUP
or button.
'menu.
STEP SIZE
or button.
button.
button.
button.