Serial; Handshake Protocol - Oce 9300 User Manual

Serial

If you are using the serial port, you will need to configure a list of parameters.
All required parameters are described in the following procedures.
Connecting serial
Turn off the printer and host
1
Connect one end of the serial cable to the computer's serial port.
2
Connect the other end to the printer's Serial port (see figure 4).
3
[4] Serial port
Turn the printer on.
4

Handshake protocol

You can select CTS2 or XON4 or BOTH. The default setting is BOTH. This
means that the printer will automatically respond to either XON/XOFF
(software protocol) or CTS (hardware protocol).
Defining handshake protocol
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
16 Océ 9300 User Manual
' item using the
ONFIGURATION
' item using the
CONNECTIONS
' item using the
SERIAL
or
' menu.
ONFIGURATION
or
' menu.
CONNECTIONS
or button.
' menu.
SERIAL
button.
button.