Instructions For Safe Use - Oce VarioPrint 2045-65 NC Job Manual

Instructions for safe use

Introduction
Océ designed products have been tested in accordance with the strictest
international safety standards. To help assure safe working with these products,
it is important that you observe the following safety rules.
Maintenance
Instructions
Do not remove any screws from fixed panels.
Do not carry out maintenance activities except for the parts and maintenance
materials mentioned in this manual.
Do not place any liquids on the machine.
Use maintenance materials or other materials for their original purpose only.
Keep maintenance materials away from children.
Do not mix cleaning fluids or other substances.
To avoid the risk of introducing hazards, all modifications to Océ equipment
are strictly reserved to properly qualified and trained service technicians.
Connection
Instructions
Do not move the machine yourself, but contact your local Océ organization.
If for some reason you have to move the machine yourself, please make sure
that the mains power point has the right fuse capacity. See the safety data
sheet in this information set for information about maximum current.
Do not bridge any mechanical or electrical circuit breakers.
It is recommended connect only those copy-control products (or other prod-
ucts) which meet the (inter)national product safety and radio frequency in-
terference standards, and to use an attachment cable as specified by Océ.
Do not use an extension lead to connect the machine.
186 Océ VarioPrint 2045-65 NC Job Manual