Printing Takes Too Long - Xerox AltaLink B80XX Series User Manual

Troubleshooting
Probable Causes
The printer cable is disconnected.
There is a wireless or network connectivity
issue.
Incorrect print driver.

Printing Takes Too Long

Probable Causes
The printer is set to print on a paper type that
requires slower printing.
The printer is in Power Saver mode.
The way the printer was installed on the
network could be an issue.
The job is complex.
Certain jobs, such as jobs using the booklet
maker, take longer to process.
230 Xerox AltaLink
® ®
User Guide
Solutions
If the Status LED does not flash once after you send a print job,
check the connection between the printer and the computer.
To test the printer, print an Information Page, such as the
Configuration Report. If the page prints, there could be a wireless
or network connectivity issue.
Contact your system administrator or refer to the System
Administrator Guide at www.xerox.com/office/ALB80XXdocs.
Check that you have the latest print driver installed. For details,
go to www.xerox.com/office/ALB80XXsupport.
Solutions
Certain paper types, like heavyweight paper and transparencies,
take more time to print. Ensure that the print driver and control
panel are set to the proper paper type.
Wait. It takes time for printing to start after the printer exits
Power Saver mode.
• Determine if a print spooler or a computer sharing the printer
• To test the speed of the printer, print multiple copies of an
Wait. No action needed.
B80XX Series Multifunction Printer
is buffering all print jobs and then spooling them to the
printer. Spooling can slow print speeds.
Information Page, such as the Configuration Report. If the
page prints at the rated speed of the printer, there could be a
network or printer installation issue. For more help, contact
the system administrator.