Xerox AltaLink B80XX Series User Manual page 220

Maintenance
WARNING:
The area around the fuser can be hot. Use caution to avoid injury.
3. Locate the fuser module, labeled R3, in the side of the printer.
4. To release the fuser module, rotate the orange thumbscrews counterclockwise. The thumbscrews
are at each end of the fuser module.
5. Pull out the used fuser module.
6. Unpack the new fuser module. Retain the packaging.
7. Insert the new fuser module as shown.
220 Xerox AltaLink
® ®
User Guide
B80XX Series Multifunction Printer