Xerox AltaLink B80XX Series User Manual page 282

Regulatory Information
ENERGY STAR
Power Consumption and Activation Time
The amount of electricity that a device consumes depends on the way the device is used. This device is
designed and configured to enable you to reduce your electricity usage.
Power Saver modes are enabled on your device to reduce energy consumption. After the last print, the
device transitions to Ready mode. In this mode, the device can print again immediately. If the device is
not used for a specified period, the device transitions to Sleep mode. The device takes longer to produce
the first print after it exits the Power Saver modes than it takes to print in Ready mode. This delay is the
result of the system waking up and is typical of most imaging devices on the market.
To save power, you can enable Auto Power Off mode on your device.To change the Power Saver settings,
refer to the User Guide at www.xerox.com/office/ALB80XXdocs. For further assistance, contact your
System Administrator or refer to the System Administrator Guide.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the System
Administrator Guide at www.xerox.com/office/ALB80XXdocs.
To learn more about Xerox participation in sustainability initiatives, go to:
xerox/environment/enus.html.
Note: Changing the default Power Saver activation times can result in an overall higher energy
consumption of the device. Before you turn off Power Saver modes or set a long activation time,
consider the increase in device power consumption.
282 Xerox AltaLink
® ®
User Guide
The ENERGY STAR program is a voluntary scheme to promote the
development and purchase of energy efficient models, which help to reduce
environmental impact. Details on the ENERGY STAR program and models
qualified to ENERGY STAR can be found at the following website:
www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGro
up&pgw_code=IEQ
The ENERGY STAR and ENERGY STAR mark are registered United States
trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between
United States, European Union, and Japanese governments and the office
equipment industry to promote energy-efficient copiers, printers, fax,
multifunction printers, personal computers, and monitors. Reducing product
energy consumption helps combat smog, acid rain, and long-term changes
to the climate by decreasing the emissions that result from generating
electricity.
B80XX Series Multifunction Printer
www.xerox.com/about-