Xerox AltaLink B80XX Series User Manual page 223

WARNING:
The area around the fuser can be hot. Use caution to avoid injury.
4. Locate the transfer roller, labeled R4, in the printer side door.
5. To remove the used transfer roller, squeeze the orange tabs at both ends of the transfer roller, then
lift the transfer roller out of the printer.
Note: Do not touch any toner adhering to the transfer roller.
6. Unpack the new transfer roller. Retain the packaging.
7. To install the new transfer roller, position the transfer roller in the side door as shown. Squeeze the
orange tabs at both ends of the transfer roller, then press down gently, until it clicks into place.
8. Place the used transfer roller in the packaging that shipped with the new transfer roller.
9. Close the left side door of the printer.
10. Reconnect the printer to the power cord, then power on the printer.
Xerox AltaLink B80XX Series Multifunction Printer
® ®
Maintenance
223
User Guide