Linux Printing Options - Xerox AltaLink B80XX Series User Manual

Selecting Finishing Options for Macintosh
If your printer has a finisher installed, select finishing options in the Xerox
To select finishing options in the Macintosh print driver:
1. In the Print window, in the print options list, click Xerox Features.
2. To select stapling options, for Finishing, click the arrow, then select an option.
3. To select the output tray, for Output Destination, click the arrow, then select an option.
− Automatic: You can use this option to have the printer determine the output destination based
on the number of sets and the stapling option selected. The printer sends multiple sets or
stapled sets to the finisher output tray.
Folder Tray: You can use this option to select the output tray for the CZ Folder.
−
− Top Tray: You can use this option to select the output tray on top of the Office Finisher or the
High Volume Finisher.
− Stacker Tray: You can use this option to select the output tray in the middle of the Office
Finisher or the High Volume Finisher.
− Booklet Maker Bin: You can use this option to select the output tray on the bottom of the High
Volume Finisher.
4. To send the job to the printer, click Print.
Saving a Set of Commonly Used Printing Options for Macintosh
You can define and save a set of options, so that you can apply them to future print jobs.
To save a set of printing options:
1. With the document open in your application, click File > Print.
2. Select your printer from the Printers list.
3. Select the required printing options from the lists in the Print dialog box.
To see all printing options, click Show Details.
Note:
Click Presets > Save Current Settings as Preset.
4.
5. Type a name for the printing options. To save the set of options in the Presets list, click OK.
6. To print using these options, select the name from the Presets list.
Xerox AltaLink B80XX Series Multifunction Printer
® ®
Features of the print driver.
®
User Guide
Printing
135