Electrical Safety; General Guidelines - Xerox AltaLink B80XX Series User Manual

Electrical Safety

This section includes:
•

General Guidelines ...........................................................................................................................................................13

• Power Cord Safety Information ..................................................................................................................................13
• Emergency Power Off......................................................................................................................................................14
• Telephone Line Cord ........................................................................................................................................................15
General Guidelines
WARNINGS:
• Do not push objects into slots or openings on the printer. Touching a voltage point or
shorting out a part could result in fire or electric shock.
• Do not remove the covers or guards that are fastened with screws unless you are
installing optional equipment and are instructed to do so. Power off the printer when
performing these installations. Disconnect the power cord when removing covers and
guards for installing optional equipment. Except for user-installable options, there are no
parts that you can maintain or service behind these covers.
The following are hazards to your safety:
• The power cord is damaged or frayed.
• Liquid is spilled into the printer.
• The printer is exposed to water.
• The printer emits smoke, or the surface is unusually hot.
• The printer emits unusual noise or odors.
• The printer causes a circuit breaker, fuse, or other safety device to activate.
If any of these conditions occur, do the following:
1. Power off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative.
Xerox AltaLink B80XX Series Multifunction Printer
® ®
Safety
13
User Guide