Changing Paper Size, Type, And Color - Xerox PHASER 7100 User Manual

Paper and Media

Changing Paper Size, Type, and Color

When Trays 1–4 are set to Allow Change mode, you can change paper settings each time you load the
tray. When you close the tray, the control panel prompts you to change the tray settings for paper size,
type, and color.
When Trays 1–4 are set to No Attribute Change mode, the prompt to change the tray settings does not
appear. The printer uses the paper guide settings to determine the paper size, and the current control
panel settings for the type and color of paper.
When you load paper into the Bypass Tray, the control panel prompts you to change the tray settings.
No Attribute Change mode does not affect Bypass Tray paper size, type, and color behavior.
To set a tray to No Attribute Change mode:
At the control panel, press Menu.
1.
2. To select Admin Menu, press the arrow buttons, then press OK.
To select Printer Settings, press the arrow buttons, then press OK.
3.
To select During Loading, press the arrow buttons, then press OK.
4.
5. To select No Attrib. Change, press the arrow buttons, then press OK.
To return the printer to Ready, press Menu.
6.
To set the paper size, type, or color for a tray in No Attribute Change mode:
At the control panel, press Menu.
1.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. To select Printer Settings, press the arrow buttons, then press OK.
To select Paper Size Settings, Paper Type, or Paper Color, press the arrow buttons, then press OK.
4.
5. To select the option that you want to modify, press the arrow buttons, then press OK.
6. To select the new setting, press the arrow buttons, then press OK.
To return the printer to Ready, press Menu.
7.
Note: When Panel Lock is On, you can be required to enter a passcode to access the control panel
menus. For details, see the System Administrator Guide at www.xerox.com/office/7100docs.
48 Phaser 7100 Color Printer
User Guide