Basic Printing; Changing Paper Type And Size At The Front Panel - Xerox Phaser 3450 Reference Manual

Paper Type/Size
Custom

Basic Printing

For information about how to load paper in Tray 1 (MPT), Tray 2, or Tray 3, see the Quick
Reference Guide that came with your printer. The Quick Reference Guide can also be found on
the Software and Documentation CD-ROM that came with your printer, or at
office/3450support.
Note
A minimum clearance of 32 mm (12.6 in.) must be maintained at the rear of the printer.
See the Setup Guide that came with your printer for minimum clearances.

Changing Paper Type and Size at the Front Panel

If you have changed the paper size, at the printer's front panel:
1.
Press the Menu button, select
2. Paper Handling,
Select
3. Tray [1, 2,
Select or
4.
Scroll to the paper size loaded, then press the OK button.
5.
Press the Cancel button to return to the main menu.
If you have changed the paper type at the printer's front panel:
1.
Press the Menu button, select
2. Paper Handling,
Select
3. Tray [1, 2,
Select or
4.
Scroll to the paper type loaded, then press the OK button.
5.
Press the Cancel button to return to the main menu.
Tray 1 (MPT) Weight: 60–163 g/m
Tray 2 and 3 Weight: 60–105 g/m
Duplex Weight: 75–90 g/m
Dimensions
Width = 76.2 ~ 215.9 mm (3 ~ 8.5 in.);
Length = 127 ~ 355.6 mm (5 ~ 14 in.)
Printer Setup, then press the OK button.
then press the OK button.
3] Size,
then press the OK button.
Printer Setup, then press the OK button.
then press the OK button.
3] Type,
then press the OK button.
Phaser™ 3450 Laser Printer
10
2
(16–43 lb.)
2
(16–28 lb.)
2
(20–24 lb.)
Basic Printing
www.xerox.com/