Electrical Safety; Emergency Power Off - Xerox Nuvera 100 Getting Started Manual

Safety and Notices

Electrical Safety

•
Use only the power cord supplied with this equipment.
•
Plug the power cord directly into a correctly grounded electrical outlet. Do not use an
extension cord. If you do not know whether or not an outlet is grounded, consult a
qualified electrician.
•
Do not use a ground adapter plug to connect this equipment to an electrical outlet that
lacks a ground connection terminal.
WARNING
You may incur a severe electrical shock if the outlet is not grounded correctly.
•
Do not place the Xerox Nuvera Printer where people may step or trip on the power cord.
•
Do not place objects on the power cord.
•
Do not override or disable electrical or mechanical interlocks.
•
Do not obstruct the ventilation openings. These openings prevent overheating of the
machine.
•
Never push objects of any kind into slots or openings on this equipment. Making a contact
with a voltage point or shorting out a part may result in fire or electrical shock.

Emergency Power Off

If any of the following conditions occur, immediately switch off the power to the machine and
disconnect the power cord from the electrical outlet. Call an authorized Xerox service
representative to correct the problem.
•
The machine emits unusual noises or odors.
•
The power cord is damaged or frayed.
•
A wall panel circuit breaker, fuse, or other safety device is tripped.
•
Liquid is spilled into the Xerox Nuvera Printer.
•
The machine is exposed to water.
•
Any part of the machine is damaged.
x
Xerox Nuvera
Getting Started Guide