Shutting Down The Projector; Selecting The Image Source - Epson PowerLite 826W+ User Manual

Shutting Down the Projector

This projector incorporates Instant Off technology. To turn the
projector off, you can press its Ppower button as described below, or
turn off a power switch that supplies power to the projector. You
don't have to wait for the projector to cool off first.
1. To turn off the projector, press the
Ppower button on the remote
control or projector.
You see a confirmation message.
(If you don't want to turn it off, press any other button.)
2. Press the Ppower button again. When the Ppower light stops
flashing and you hear two beeps, unplug the power cord.
If you want to turn the projector on again, make sure the orange
Ppower light is not flashing, then press the Ppower button.
3. If you extended the adjustable front foot, press up on the foot
release lever to retract it.
4. Close the A/V Mute slide.

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of connected equipment (such as a computer or DVD
player).
If you don't see the image you want, press the
on the remote control or projector until you see the image you want to
project.
button
Source Search
Displaying and Adjusting the Image
note
Lamp life results will vary
depending on mode selected,
environmental conditions,
and usage.
Turn off this product when
not in use to prolong the life
of the projector.
note
To focus and adjust the
image, see page 26. If a
projected image fails to
appear, see page 136 for
help.
25