Connecting To Video Equipment; Connecting A Composite Video Source - Epson PowerLite 826W+ User Manual

RCA connector
(composite video)
S-video
connector
VGA connector
(RGB video)
Connecting to Computers, USB Devices, and Other Equipment
54

Connecting to Video Equipment

You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video player has a yellow RCA-style video output
connector, see "Connecting a Composite Video Source" below.
■ If your video player has an S-video connector, see "Connecting an
S-Video Source" on page 55.
■ If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see "Connecting a
Component Video Source" on page 56.
If your video player has an RGB video port (either a single
■
connector for a VGA-style monitor cable or three connectors
labeled R/G/B), see "Connecting an RGB Video Source" on
page 57.
After connecting video cables, you may also want to connect an audio
cable to play sound through the projector; see page 59.

Connecting a Composite Video Source

1. Locate an RCA-style video cable (one is usually provided with
your video equipment or you can purchase one from an
electronics dealer).
2. Connect the cable to the yellow video output connector on your
player and the yellow connector on the projector:
Video
Connect video cable