Creating Your Own Startup Screen - Epson PowerLite 826W+ User Manual

note
Once you capture an image,
it automatically replaces the
Epson startup screen.
Although you can change the
startup screen, you cannot
restore the original one.
Fine-Tuning the Projector
114

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use from either a computer
or video source, such as a DVD player. With the PowerLite
85+/824+/825+/826W+, you can also use an image from a USB
device. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the button on the remote control, highlight the
Menu
menu, and press
Extended
2. Highlight
User's Logo
3. When you see a message asking
, select
User's Logo?
displays over the image.
4. Use the pointer buttons to select the area of the image you
want to use. Then press
5. When you see the message
and press .
Enter
button. The image can be a company
.
Enter
and press .
Enter
Choose this image as the
and press . A selection box
Yes Enter
.
Enter
Select this Image?
, highlight
Yes