Shutting Down The Projector - Epson PowerLite 260D User Manual

Shutting Down the Projector

When you've finished using the projector, follow the recommended
procedure to shut it down:
1. If you're using a computer, shut it down first; otherwise you may
not be able to see your computer's display to shut it down
properly.
2. If you turned on
Direct Power On
unplug the projector or flip the switch controlling the outlet to
which the projector is connected. With Epson's exclusive Instant
®
Off technology there's no cool-down period, so you can pack up
and go immediately after turning off the projector.
If you did not turn on
button on the projector or remote control.
You see this confirmation message:
(If you don't want to turn it off, press
any other button or wait a few
seconds until it disappears.)
3. Press the P
Power
lamp is turned off, and the power light turns orange.
With Epson's exclusive Instant Off technology there's no
cool-down period, so you can pack up and go immediately after
turning off the projector.
If you want to turn the projector on again, press the P
button.
4. If necessary, press up on the blue foot release lever and lower the
projector to retract the front adjustable foot.
5. Unplug the power cord.
6. Turn off and disconnect any equipment plugged into the
projector.
7. If you won't be using the projector for awhile, store it in a
protective case.
(see page 61), you can now
, press the P
Direct Power On
button again. The projector beeps twice, the
note
You can set the projector so
that it automatically turns off
the projector lamp and enters
"sleep mode" if it has not
received any input signals for
30 minutes. This conserves
electricity, cools the projector,
and extends the life of the
lamp. You can turn sleep
mode on or off through the
Extended menu. See page 62.
If you are done using the
projector, unplug the power
Power
cord or turn off the power
switch controlling the outlet
to which the projector is
connected.
Turn off this product when
not in use to prolong the life
of the projector.
caution
To avoid damaging the
projector or lamp, never
Power
unplug the power cord
when the power light is
green or flashing orange.
Projecting
41