Epson PowerLite 826W+ User Manual page 137

If you're projecting through your computer's USB port, make
■
sure the
USB Type B
(see page 118). The USB display feature is not available
Display
for Windows 98 or Me.
With Windows, you may need to install the USB display drivers
manually by clicking
, then
EPSON_PJ_UD
after the USB display drivers are installed, click
EPSON Projector
on your computer.
Display Vx.x
With Mac OS X, click the
there is no USB Display icon in the Dock, open the
folder in the Applications folder and run
If you see a black screen and you are connected through your
■
computer's USB port (or through your network with your
PowerLite 85+/825+/826W+), the application may be using
DirectX drawing features, which are not supported.
You've connected a computer and see a blue screen with the
message displayed.
No Signal
■ Make sure the cables are connected correctly and securely, as
described on page 48.
If you've connected more than one computer and/or video source,
■
you may need to press the
control or projector or one of the source buttons on the remote
control to select the correct source. Pressing the
button on the remote control will toggle between Computer1 and
Computer2 inputs. Allow a few seconds for the projector to sync
up after pressing the button.
If you're using a PC notebook:
■ Press the function key on your keyboard that lets you display on
an external monitor. It may have an icon such as
be labeled
CRT/LCD
setting in the Extended menu is set to
or
My Computer Computer
. If nothing is projected
EMP_UDSE.EXE
,
EPSON USB Display
USB Display
USB Display
Source Search
. You may have to hold down the
USB
, then
,
All Programs
, then
EPSON USB
icon in the Dock. If
USB Display
.
button on the remote
Computer
, or it may
key
Fn
Solving Problems
137