Connecting An External Monitor - Epson PowerLite 826W+ User Manual

Connecting an External Monitor

If you want to see your presentation close-up as well as on the
projection screen, you can connect an external monitor to the
projector (PowerLite 84+/85+/825+/826W+ only).
This lets you view images on your computer monitor while the
projector is in standby mode (plugged in but not turned on). You can
also check your presentation or switch between picture sources even if
you've pressed the
A/V Mute
projection on the screen.
Connect the monitor's cable to the projector's
shown.
button on the remote control to turn off
Monitor Out
Connecting to Computers, USB Devices, and Other Equipment
note
To use an external monitor,
your computer must be
port as
connected to the Computer1
port. Additionally, you
cannot use an external
monitor if your signal is
component video.
53