Starting The Projector With A Password - Epson PowerLite 826W+ User Manual

Fine-Tuning the Projector
112
8. To enable your screen logo, select
. Select and press
Enter On
When this feature is on, the logo appears whenever you turn on
the projector (if the
menu; see page 114). It also appears when you press the
button (if you selected the
A/V Mute
setting under Display in the Extended menu). None of the User's
Logo features in the Extended menu can be changed when the
User's Logo Protect function is enabled.
9. To enable network setting protection, select
and press . Select
Enter
When this feature is on, none of the network settings on the
menu can be changed.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the button on the remote control and use the
Num
numeric keypad to enter the four digit password.
The password screen closes, the numeric keypad is automatically
deactivated, and projection begins.
User's Logo Protect
.
Enter
is enabled in the Extended
Startup Screen
Logo
and press
On Enter
and press
for the
A/V Mute
Network Protect
.