Adjusting The Image - Epson PowerLite 826W+ User Manual

note
When you select Reset All in
the Reset menu, it does not
reset the Input Signal, User's
Logo, Lamp Hours,
Language, or User Button
settings. Additionally, no
items in the Network menu
are reset.
note
The Brightness setting
changes the opacity of the
projector's LCD panels. You
can also use the Power
Consumption setting to
change the lamp's brightness
(see page 108).
Fine-Tuning the Projector
104
To restore all the projector settings to their factory-default values,
select the menu, highlight
Reset

Adjusting the Image

You can use the Image menu to adjust the brightness, sharpness, color,
tint, and contrast.
1. Press the button on the projector or remote control, select
Menu
the menu, and press
Image
similar to the one below:
2. Use the pointer buttons to highlight the desired option, then
adjust it as needed:
■
Color Mode
Lets you quickly adjust the color and brightness for various
uses. You can save a different setting for each source. See
page 38 for details on each setting.
You can also change the color mode by pressing the
button on the remote control.
Mode
■
Brightness
Lightens or darkens the overall image.
■
Contrast
Adjusts the difference between light and dark areas.
, and press
Reset All Enter
. You see an Image menu screen
Enter
.
Color