Using Keystone Correction
To adjust your image when it is wider on the top or bottom, do the
following:
Press one of the two keystone correction buttons on the
■
projector's control panel, as shown below. Continue pressing the
button until you are satisfied with the shape of the image.
■
Or press the
Menu
select the
Settings
From the Settings menu, select
the
pointer buttons on the remote control to adjust the
keystone setting as needed.
If the image quality declines (for example, lines or edges look
jagged), reduce the sharpness setting. See page 105.
button on the remote control or projector,
menu, and press
Enter
Keystone
.
and press
. Use
Enter
Displaying and Adjusting the Image
tip
You can display a test
pattern to help align the
image (see page 109).
29