Epson PowerLite 825 Quick Setup Manual
Epson powerlite 825: install guide
Hide thumbs
Also See for PowerLite 825:
- Quick start manual ,
- User manual (175 pages) ,
- Operation manual (69 pages)
Table of Contents
Advertisement
Quick Links
PowerLite
85/825/826W
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector's Computer1 or Computer2 port, and
the other end to your computer's
monitor port. If you are using a
notebook, switch it to external display. You can also connect an audio cable or
microphone.
Computer USB Port
Connect a computer (Windows
2000 or later only) using the USB cable that
®
came with the projector.
Connect the square end of the USB cable to the projector's
Type B
(square) USB port. Connect the flat end of the cable to any USB port on your
computer. You can also connect an audio cable or microphone.
Follow the on-screen instructions to install the Epson USB Display software.
Then press the USB button on the remote control.
Network (LAN)
Connect the projector to your network using an Ethernet
cable. See "Project
®
Over the Network" on the back of this sheet for more information.
*411676200*
*411676200*
Advertisement
Table of Contents
Related Manuals for Epson PowerLite 825
Summary of Contents for Epson PowerLite 825
-
Page 1: Quick Setup
(square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone. Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control. -
Page 2: Video Player
If you connect a digital camera or USB storage device, you can use the projector’s Slideshow feature. See the EasyMP Operation Guide on your projector CD. For information on playing sound through the projector or connecting an external monitor, see the User’s Guide on your projector CD. -
Page 3: Turn On Your Equipment
NOTE: To shut down the projector, press the unplug it. You don’t have to wait for the projector to cool down. Adjust the image If you don’t see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. -
Page 4: Using The Remote Control
Navigate projector menus You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide. , you’ve placed the projector off to... - Page 5 Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see “Network Configuration.”...
-
Page 6: Network Configuration
Network configuration If you need to configure the projector for your network, you can use the projector’s menu system. Press the Menu button on the remote control, select the Network menu, then press Enter. Choose Network Configuration and press Enter. -
Page 7: Troubleshooting
If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. •... -
Page 8: Where To Get Help
Wireless LAN module Quick Wireless Connection USB key Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.