Using Snmp To Monitor The Projector - Epson PowerLite 826W+ User Manual

note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you're monitoring.
Using the Projector on a Network
96
When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is
EPSON Projector
The e-mail includes the following information:
■ Line 1: The name of the projector where the problem has
occurred
■ Line 2: The IP address of the projector where the problem has
occurred
■ Line 3: Details of the problem

Using SNMP to Monitor the Projector

Network administrators can use SNMP (Simple Network
Management Protocol) to monitor projectors.
1. Press the button on the remote control, select the
Menu
menu, then press
Network
2. Choose
Network Configuration
3. Choose , then press
Others
following:
4. Turn on the SNMP setting.
.
.
Enter
and press
Enter
. You see a screen like the
Enter
.