Connecting To The Vga Port - Epson PowerLite 826W+ User Manual

Connecting to the VGA Port

You can connect to your computer using the VGA computer cable
that came with the projector (the monitor port on your computer
must be a mini D-sub 15-pin port).
1. Connect one end of the VGA computer cable to the projector's
blue or
Computer1
computer's monitor port.
2. You can connect an optional stereo mini-jack audio cable to play
sound through the projector (see page 59), or connect the USB
cable to use the remote control as a mouse (see page 51).
3. When you've finished making any connections, see page 23 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
button on the remote control or the projector's
Source Search
control panel.
port, and the other end to your
Computer2
Connect to computer
Connecting to Computers, USB Devices, and Other Equipment
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or RGB (see
page 107).
49