What To Do When The Lights Flash - Epson PowerLite 826W+ User Manual

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status.
Power light
Lamp light
Refer to the following table for a complete description of the
projector's status lights:
Status lights
Light Status
Orange
Flashing
green
Green
Flashing
orange
Red or
flashing red
Flashing red
Flashing red
Description
The projector is in sleep or standby mode. You can unplug it or you can
P
press the power button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector is cooling down or preparing network monitoring. You can't
turn it back on (and you should not unplug it) until the light stops flashing
and remains orange.
There is a problem with the projector. Check the other two lights and the
information in the rest of this table to diagnose the problem.
Power is cut off because of an internal problem. Unplug the power cord
and contact Epson for help, as described on page 149.
The auto iris or ballast is malfunctioning. Unplug the power cord and
contact Epson for help, as described on page 149.
Temperature
light
Solving Problems
133