Epson PowerLite 826W+ User Manual page 113

If the password is not correct, you see a message prompting you to
re-enter the password. If you enter an incorrect password three times
in succession, you see the message
The projector's operation will be
. Write down the request code. The
locked. Request code xxxxx
message displays for approximately 5 minutes, and then the projector
switches to standby mode. Once the projector is in standby mode,
disconnect the projector's power cord from the electrical outlet,
reconnect it, and turn the projector back on.
When you see the Password Protect Release screen again, you can try
to enter the correct password.
If you enter an incorrect password 30 times in succession, the
projector remains locked and you must contact Epson to have the
projector serviced.
If you have forgotten the password, contact Epson with the request
code number that appears in the Password Protect Release screen for
assistance. See "Where to Get Help" on page 149.
Fine-Tuning the Projector
113