Connectivity; Management; Switch Configuration Using Webview; Description Of Mini-Gbics - Enterasys SecureStack C2 C2G124-48P Hardware Installation Manual

Connectivity

Connectivity

The switch connects to Ethernet networks or workstations through the fixed front panel
RJ45 connectors and four uplink ports that support optional Mini‐GBICs.
At the time of this printing, the six Mini‐GBICs available from Enterasys are described in
Table
Table 1-2 Description of Mini-GBICs
Mini-GBIC
MGBIC-LC01
MGBIC-LC03
MGBIC-LC09
MGBIC-MT01
MGBIC-08
MGBIC-02

Management

Management of the module can be either in‐band or out‐of‐band. In‐band remote
management is possible using Telnet, Enterasys Networks' NetSight
application, or the WebView application. Out‐of‐band management is provided through
the RJ45 COM (Communication) port on the front panel using a VT100 terminal or a
VT100 terminal emulator.

Switch Configuration Using WebView

Enterasys Networks' HTTP‐based Web management application (WebView) is an
intuitive web tool for simple management tasks.
1-6 Introduction
1‐2 on page 1‐6. These Mini‐GBICs meet or exceed the IEEE 802.3z‐1998 standard.
Specification
Provides one 1000BASE-SX compliant LC fiber-optic multimode port and a
standard LC connector. For optical and operating range specifications, refer to
"MGBIC-LC01/MGBIC-MT01 Specifications
Provides one 1000BASE-LX compliant LC fiber-optic multimode port with a
standard LC duplex connector. For optical and operating range specifications,
refer to "MGBIC-LC03 Specifications
Provides one 1000BASE-LX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
"MGBIC-LC09 Specifications
Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a
standard MT-RJ connector. For optical and operating range specifications,
refer to "MGBIC-LC01/MGBIC-MT01 Specifications
page A-4.
Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
"MGBIC-08 Specifications
Provides one 1000BASE-T compliant copper port with an RJ45 connector. For
details, refer to
(1000BASE-LX)" on page A-4.
(1000BASE-LX)" on page A-5.
(1000BASE-ELX)" on page A-6.
"MGBIC-02 Specifications
(1000BASE-SX)" on page A-4.
(1000BASE-SX)" on
(1000BASE-T)" on page A-6.
®
management