Enterasys SecureStack C2 C2G124-48P Hardware Installation Manual page 71

To reset the switch password, refer back to Figure
Note: Notify the system manager before changing the password.
1. Press‐and‐hold the Reset button while the switch is operational. This change of the
login password to the default password will be indicated through CLI only.
2. Logon to device management. You can now logon to the switch through the Console
port and assign a new password using the command line interface (CLI).
3. To access switch management from your local PC, terminal, or modem connection,
refer to the SecureStack C2 Configuration Guide for instructions on how to log in and
enter a new password. The guide is available at:
http://www.enterasys.com/support/manuals
If you require assistance, contact Enterasys Networks using one of the methods described
in "Getting Help" on page 1‐7.
Using the Reset Button
4‐3 and proceed as follows:
SecureStack C2 Installation Guide 4-9