Chapter 2: Network Requirements - Enterasys SecureStack C2 C2G124-48P Hardware Installation Manual

Before installing the device, review the requirements and specifications in this chapter
concerning the following:
Note: All RJ45 connectors support PoE connections from network PDs (Powered
Devices).
For information about...
10BASE-TX Network
100BASE-TX Network
1000BASE-FX Network
1000BASE-T Network
Note: The network installation must meet the requirements described in this chapter to
ensure satisfactory performance of this equipment. Failure to do so will produce poor
network performance.
Note: The SecureStack C2 Configuration Guide and the Cabling Guide referred to in the
following sections can be found on the Enterasys Networks World Wide Web site:
http://www.enterasys.com/support/manuals
For details about obtaining the manuals, refer to
Network Requirements
"Related
SecureStack C2 Installation Guide 2-1
2
Refer to page...
2-2
2-2
2-2
2-3
Documents" on page xvi.