Features And Benefits; Connectivity; Expandability; Performance - Enterasys Matrix-V V2H124-24FX Hardware Installation Manual

Matrix v-series fast ethernet switch

Hide thumbs Also See for Matrix-V V2H124-24FX:

Table of Contents

Introduction

The module provides two 1 Gbps ports via USB Type-A connectors. The right port is

for transmit and the left port for receive. The module allows up to eight switches to

be linked together using stacking cables. The push button on the module enables

one switch in the stack to be selected as the master.

Features and Benefits

• 24 independent MT-RJ 100BASE-FX multimode ports.

• IEEE 802.3 Ethernet, 802.3u Fast Ethernet, 802.3z and 802.3ab Gigabit Ethernet

compliance ensures compatibility with standards-based hubs, network cards and

switches from any vendor.

• Optional single-port 100BASE-FX multimode and single-mode modules

• Optional single-port 1000BASE-T Gigabit module

• Optional combination 1000BASE-T/SFP Gigabit module, providing a choice of a

1000BASE-T UTP connection or an SFP transceiver fiber connection.

• Optional stacking module providing two USB ports for stacking up to 8 units.

• Transparent bridging

• Aggregate duplex bandwidth of up to 8.8 Gbps

• Switching table with a total of 8K MAC address entries

• Provides store-and-forward switching

• Wire-speed filtering and forwarding

• Supports flow control, using back pressure for half duplex and IEEE 802.3x for full

duplex

• Broadcast storm control

1-8

Table of Contents