Sony GY-8240FC Operation Manual page 71

Error Contents
code
1x4A W(6)/R(1) CRC error
1x4F The system does not operate.
1x5B Cassette write-protected, or
writing to a DTF-1 tape
attempted.
1x6B Error in the packet of a
command block.
1x6C An unsupported command
was received.
1x6D Command sequence error
1x6F Command received in ABORT
mode
1x7B EOT reached during an
operation
1x7F Timeout with no change in
TTP status
1090 Timeout of ACK for an SYS
command
1091 Timeout of FREE for an SYS
command
1092 Timeout 1 of INT for an FMT
command
1093 Timeout 2 of INT for an FMT
command
1094 Timeout 3 of INT for an FMT
command
1095 Timeout 4 of INT for an FMT
command
1xA0 Uncorrected error on Ach/Ech
1xA1 Uncorrected error on Ach only
1xA2 Uncorrected error on Ech only
1xA3 Command received after C2
Over
1xA4 Command received after IN
Over
1xB1 Timeout 1 while waiting for
XFER ABORT INT
1xB2 Timeout 2 while waiting for
XFER ABORT INT
1xC0 Failed EE up to the processor
at the DPR board
1xC1 Failed EE including EQ at the
DPR board
1xC2 Failed EE (with CRC) up to the
processor at the DPR board
1xC3 Failed EE (with CRC) including
EQ at the DPR board
1xCF Failed execution of DIAG from
other FMT.
1xYY Other errors
2x01 EOT reached during a REC/
PLAY operation
Measures Error
code
Consult authorized
2x02 Illegal command received at
personnel.
2x03 Illegal command received at
2x04 REC command received for a
2x05 Search aborted
2x06 Illegal status change attempted
2x0A Illegal cassette
2x10 Moisture condensation
Eject and change the
2x14 Main cooling fan failure
cassette.
2x15 Power supply cooling fan
2x62 Wrong ID found after detecting
Consult authorized
personnel.
2x63 Lost lock occurred after
2x64 IN point exceededin REC/
2x65 Block where CTL is abnormal
2x66 CTL not locked at the pre-IN
2x67 AT not locked at the pre-IN
Unload the tape,
insert a cleaning
cassette, and perform 2x68 SV not locked when executing
tape cleaning.
Consult authorized 2x69 EOT or BOT found during a
personnel.
2x6A Retry over of hunting during a
2x6B Search aborted during CTL/TC
2x78 SV in fatal status
2x79 SV in an independent mode
2x7B Failed SV DIAG
2x94 Abnormality detected in
2x96 Abnormality detected in EQ
2x97 Nonvolatile RAM on the DPR
2x98 Unable to write data to
2x99 Timeout in writing data to
Contents
BOT
EOT
write-protected cassette
detected
failure
the pre-IN point
detecting the pre-IN point
PLAY
found before detecting the pre-
IN point
point in REC/PLAY
point in REC/PLAY
Crash REC
search operation
search operation
retry
transmission with the SV CPU
data in nonvolatile RAM on the
DPR board
board abnormal
nonvolatile RAM on the DPR
board
nonvolatile RAM on the DPR
board
Measures
Consult authorized
personnel.
Wait until the
condensation is
cleared.
Consult authorized
personnel.
Unload the tape,
insert a cleaning
cassette, and perform
tape cleaning.
Consult authorized
personnel.
25 (E)