Diag Menu; Update Menu - Sony GY-8240FC Operation Manual

DIAG Menu

You can select "Hours meter" on the DIAG menu at
present.
When you press [ENTER], the item selection for
"Hours meter" is enabled.
Pressing [ESC] restores the Menu Select mode (page
27).
Pressing [SELECT] terminates the menu operation and
restores the normal operation mode.
To normal operation mode
Menu Select mode
Select menu
DIAG menu
[ESC] [ENTER]
DIAG menu :1
Hours meter
[ENTER]
Hours meter
Press $ or 4 to select the Hours meter items.
When you press [ENTER], the value of the selected
item is displayed.
Pressing [ESC] restores the DIAG menu item selection
mode.
Pressing [SELECT] terminates the menu operation and
restores the normal operation mode.
DIAG menu item
selection mode
DIAG menu :1
Hours meter
[ENTER]
[ESC]
Hours meter
Operation (hour)
$ 4
[ESC]
Hours meter
Drum run (hour)
4
$
Hours meter
Operation (hour)
[SELECT]
Hours meter
To normal operation mode
[SELECT]
[ENTER]
Operation (hour)
00001001
[ESC]
The cumulative time of
use is displayed.
[ENTER]
Drum run (hour)
00000980
[ESC]
The cumulative time of
drum operation is
displayed.

UPDATE Menu

When you press [ENTER], a confirmation message for
updating is displayed.
Pressing [ESC] restores the Menu Select mode (page
27).
Pressing [SELECT] terminates the menu operation and
restores the normal operation mode.
(If [ESC] or [SELECT] is pressed, the previous values
are restored.)
To normal operation mode
Menu Select mode
Select menu
UPDATE menu
[ENTER]
[ESC]
[ENTER]
UPDATE menu :1
From tape
[ESC]
During the updating operation, the status of updating is
displayed.
When the operation is completed, the cassette is
ejected, and the unit is automatically rebooted.
Note
The firmware update operation should be performed
by an authorized service personnel with the special
cassette for updating.
NEVER use this menu in normal use.
[SELECT]
UPDATE menu :1
Update OK?
[ENTER]
Updating is executed.
29 (E)