Rackmount Installation
3.8.1
Connecting Power
Note: The two power supplies in the switch have automatic voltage sensing, which allows
connection to power sources ranging from 100–125 Vac, 2.5 A or 200–240 Vac, 1.25 A, 50/60 Hz.
To connect the switch to the power sources, refer to
1. Plug each power cord
➂
outlet
as shown in
cord must be plugged into a separate dedicated ac outlet
Figure 3-8 AC Power Connections
➀
AC power cords
➁
AC power receptacles
3-12
Hardware Installation
➀
into an ac power receptacle
Figure
3-8. To take advantage of the redundancy capability, each power
Á
Â
➂
Grounded AC outlets (Each outlet is on a separate circuit)
Figure 3-8
and proceed as follows:
➁
in the switch, then into a grounded ac
➂
.
À