Mgbic-Lc03 Specifications (1000Base-Sx; A-9 Mgbic-Lc01 / Mgbic-Mt01 Operating Range; A-11 Mgbic-Lc03 Operating Range - Enterasys Matrix E1 1G694-13 Installation Manual

Gigabit Ethernet Specifications
Table A-9 MGBIC-LC01 / MGBIC-MT01 Operating Range
Item
62.5 µm MMF
62.5 µm MMF
50 µm MMF
50 µm MMF
A.5.2

MGBIC-LC03 Specifications (1000BASE-SX)

Table A-10 MGBIC-LC03 Optical Specifications
Item
Transmit Power (minimum)
Transmit Power (maximum)
Receive Sensitivity
Link Power Budget
(Multimode Only)
1. The maximum drive distance (up to 2 km) depends on the quality of the installed multimode fiber-optic cable
segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The
Link Power Budget must not exceed those specified in this table. The MGBIC-LC03 input power must not
exceed -3 dBm. Otherwise, saturation could occur.
Table A-11 MGBIC-LC03 Operating Range
Item
62.5 µm MMF
50 µm MMF
A-6 Specifications
Modal Bandwidth @
850 nm
160 MHz/km
200 MHz/km
400 MHz/km
500 MHz/km
62.5/125 µm MMF
-9.5 dBm
-3 dBm
-20 dBm
1
10.5 dBm
Modal Bandwidth @ 1310 nm
160 MHz/km
400 MHz/km
Range
2-220 Meters
2-275 Meters
2-500 Meters
2-550 Meters
50/125 µm MMF
-9.5 dBm
-3 dBm
-20 dBm
10.5 dBm
Range
2,000 Meters
2,000 Meters