Connecting Power - Enterasys Matrix E1 Series Installation Manual

Installation
Figure 3-11 Fastening the Device to the Rack
1G582-09
➀
Rails of 19-inch rack
3.7.4

Connecting Power

NOTE: The two power supplies in the device have automatic voltage sensing that
allows connection to power sources ranging from 100–125 Vac, 2.5 A or 200–240 Vac,
1.25 A, 50/60 Hz.
To connect the device to the power sources, refer to
1. Plug a power cord
capabilities, each power cord must be plugged into a separate dedicated ac outlet
2. Plug the other end of each power cord
Figure 3-12.
NOTE: To take advantage of the load sharing and redundancy capabilities, each power
cord must be plugged into a separate dedicated ac outlet.
3-18 Hardware Installation
PWR
CPU
RESET
COM
1 1 2 2
Á
➀
into each switch ac power receptacle
À
3 3 4 4 5 5
➁
Mounting screws (supplied by user)
Figure 3-12
➀
into a dedicated grounded ac outlet
6 6
and proceed as follows:
➁
. To take advantage of redundancy
➂
➂
.
as shown in