Table of Contents
Advertisement
Figure 1-2 Optional Ethernet Expansion Modules
Table 1-1 Optional Ethernet Expansion Module, Compliance, and Physical Connection
Ethernet Expansion
Module
ZPIM1-01
ZPIM1-06
1.3
MANAGEMENT
Management of the module can be either in-band or out-of-band. In-band remote management is
possible using Telnet and Enterasys Networks' WebView application. Out-of-band management is
provided through the RJ45 COM port on the front panel using a VT100 terminal or a VT100
terminal emulator.
1.3.1
Switch Configuration Using WebView
Enterasys Networks' HTTP-based Web management application (WebView) is an intuitive web
tool for simple management tasks.
1.3.2
Switch Configuration Using CLI Commands
The CLI commands enable you to perform more complete switch configuration management
tasks.
For information about the CLI command set, refer to the Matrix E1 1G694-13 Configuration
Guide.
Compliant to
10-Gigabit Ethernet
10-Gigabit Ethernet
Physical Connection
One fixed SC connector
One slot for an optional 10-Gigabit
Ethernet (10 GbE) module with one fiber
optic SC connector. This module must
conform to the XENPAK 10 GbE standard.
Management
Introduction
1-3
Advertisement
Table of Contents
Troubleshooting
