Lanview Leds - Enterasys Matrix E1 1G694-13 Installation Manual

Table 4-1 LANVIEW LEDs
LED Color
PWR Off
Amber
Green
CPU Red
Amber
Green
Amber
and
Green
State
No power.
Solid. Power supply
functional not in
redundant mode.
Solid. Power supplies are
functioning and are in the
redundant mode.
Blinking. Hardware
failure has occurred.
Solid. Resetting, normal
power up reset.
Blinking. Crippled.
Solid. Testing.
Solid. Functional.
Booting. Blinks amber
and green while booting.
Recommended Action
Ensure that the switch has adequate power.
1. Ensure that the power cords are plugged
in correctly and that there is power at the
two power sources.
2. Contact Enterasys Networks for
technical support.
None.
Contact Enterasys Networks for technical
support.
If the LED remains Red for several
minutes, the system may have a fatal error.
Contact Enterasys Networks for technical
support.
Contact Enterasys Networks for technical
support.
If the LED remains amber for more than
several minutes, contact
Enterasys Networks for technical support.
None.
None.
Using LANVIEW
Troubleshooting 4-3