Table of Contents
Advertisement
The following list explains each of the Local Management fields:
Event Message Field
This field briefly displays messages that indicate if a Local Management procedure was executed
correctly or incorrectly, that changes were saved or not saved to Non-Volatile Random Access
Memory (NVRAM), or that a user did not have access privileges to an application.
Table 1-1
describes the most common event messages. Event messages related to specific Local
Management applications are described with those applications throughout this manual.
Table 1-1 Event Messages
Message
SAVED OK
NOT
SAVED--PRESS
SAVE TO KEEP
CHANGES
NOTHING TO
SAVE
Heading Field
Indicates the model of the device.
Display Fields
Display fields cannot be edited. These fields may display information that never changes, or
information that may change as a result of Local Management operations, user selections, or
network monitoring information. In the screens shown in this guide, the characters in the display
fields are in plain type (not bold). In the field description, the field is identified as being
"read-only".
What it Means
One or more fields were modified, and saved to NVRAM.
Attempting to exit the LM screen after one or more fields were
modified, but not saved to NVRAM.
The SAVE command was executed, but nothing was saved to NVRAM
because there were no configuration changes since the data was last
saved.
Local Management Screen Elements
Introduction
1-5
Advertisement
Table of Contents
