This chapter provides the following information:
•
Management Terminal Setup
terminal to the host device.
•
Telnet Connections
access Local Management.
•
Monitoring an Uninterruptible Power Supply
connection from the COM port to an American Power Conversion (APC) Uninterruptible Power
Supply (UPS) device. This type of connection enables the SmartSwitch device to monitor the
power status in case of a power loss.
2.1
MANAGEMENT TERMINAL SETUP
Use one of the following systems to access Local Management:
•
A PC or compatible device running a VT series emulation software package
•
A Digital Equipment Corporation VT100 type terminal
•
A VT type terminal running emulation programs for the Digital Equipment Corporation VT100
series
•
A remote VT100 type terminal via a modem connection
•
In-band via a Telnet connection
Local Management Requirements
(Section
2.1), which describes how to attach a Local Management
(Section
2.2), which provides guidelines when using a Telnet connection to
(Section
2.3), which describes how to make a
Local Management Requirements
2
2-1