Enterasys 2H25x User Manual page 212

GARP Configuration Screen
Table 8-2 GARP Configuration Screen Field Descriptions (Continued)
Use this field...
Set All Ports
(Selectable)
GMRP Protocol
(Toggle)
GVRP Protocol
(Toggle)
8-6 GARP Configuration Menu Screens
To...
Set all ports to the same setting by selecting one of the following:
GMRP Enable All – Sets all ports as GMRP-aware ports. All ports are
set to Y under GMRP.
GMRP Disable All – Sets all ports as not GMRP-aware ports. All
ports are set to N under GMRP.
GVRP Enable All – Sets all ports as GVRP-aware ports. All ports are
set to Y under GVRP.
GVRP Disable All – Sets all ports as not GVRP-aware ports. All ports
are set to N under GVRP.
Enable All – Sets all ports to Y for both GMRP and GVRP.
Disable All – Sets all ports to N for both GMRP and GVRP.
To set all ports, refer to
Enable or disable the GMRP Protocol on the switch.
When set to Enable, all port settings are valid for GMRP, enabling
those ports to send/receive frames to other GMRP-aware switches.
Disable makes the port settings invalid.
The default setting is "Disable".
To enable or disable the protocol, refer to
Enable or disable the GVRP Protocol on the switch.
When set to Enable, all port settings are valid for GVRP enabling those
ports to send/receive frames to other GVRP-aware switches. Disable
makes the port settings invalid.
The default setting is "Disable".
To enable or disable the protocol, refer to
Section 8.2.1.
Section
Section
8.2.2.
8.2.2.