Table of Contents
Advertisement
Local Management Screen Elements
Input Fields
Input Fields require the entry of keyboard characters. IP addresses, subnet mask, default gateway
and device time are examples of input fields. In the screens shown in this guide, the characters in
the input fields are in bold type. In the field description, the field is identified as being
"modifiable".
Selection Fields
Selection fields provide a series of possible values. Only applicable values appear in a selection
field. In the screens shown in this guide, the selections display within brackets and are in bold
type. In the field description, the field is identified as being either "selectable" when there are more
than two possible values, or "toggle" when there are only two possible values.
Command Fields
Command fields (located at the bottom of Local Management screens) are used to exit Local
Management screens, save Local Management entries, or navigate to another display of the same
screen. In the screens shown in this guide, the characters in this field are all upper case and in bold
type. In the field description, the field is identified as being a "command" field.
1-6
Introduction
Advertisement
Table of Contents
