Special Commands - Enterasys 2H25x User Manual

Special Commands

With the above configuration, an AppleTalk frame received on any port will be classified into
VLAN 2 (the AppleTalk VLAN), and the Port VLAN List of that port is updated to include
VLAN 2.
For instance, if Port 1 or 2 is connected to a new AppleTalk user, the AppleTalk frames received on
that port are dynamically associated with VLAN 2 and VLAN 2 is added to the Port VLAN List of
that port. The Port VLAN List contains a list of all VLANs whose frames can be transmitted out
that port.
In this example, the AppleTalk traffic is routed only to AppleTalk users (Ports 1, 2, 5, and 6), while
IP traffic is allowed to be seen by IP users (Ports 3, 4, and 7) and by IP/AppleTalk users (Ports 1, 2,
5, and 6).
11.5 SPECIAL COMMANDS
done, quit, or exit
Description: The done, quit, or exit command enables the user to exit from Network Tools
and return to the Main Menu screen.
Syntax: done, quit, or exit
Options: None
Example:
-> done
Connection closed
11-26 Network Tools Screens