Garp Configuration Menu Screen - Enterasys 2H25x User Manual

GARP Configuration Menu Screen

8.1

GARP CONFIGURATION MENU SCREEN

When to Use
To access the GARP Configuration screen and the GMRP Configuration screen. These two screens
are used to configure the ports on the switch as GVRP- and/or GMRP-aware ports.
Before attempting the VLAN configuration, ensure that the SmartSwitch module is operating in
the 802.1Q SWITCHING mode. The mode selection is a Local Management operation that is
accessible through the General Configuration screen.
CAUTION: The SmartSwitch module resets when changing operational modes.
How to Access
Use the arrow keys to highlight the GARP CONFIGURATION MENU item on the 802.1
Configuration Menu screen and press ENTER. The GARP Configuration Menu screen, Figure 8-1,
displays.
Screen Example
Figure 8-1 GARP Configuration Menu Screen
8-2 GARP Configuration Menu Screens