Setting A Mode For All Ports - Enterasys 2H25x User Manual

GMRP Configuration Screen
8.3.2

Setting a Mode for All Ports

The modes of operation are the same as the ones described in
are affected. To set all the ports to operate in one mode, proceed as follows:
1. Use the arrow keys to highlight the Set All Ports field.
2. Press the SPACE bar to select one of the following modes of operation:
•
Use GMRP Filter Unreg
•
Forward All Groups
•
Filter All Groups
•
Use GMRP Forward Unreg
3. Press ENTER.
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
5. Press ENTER. The message "SAVED OK" displays and all ports operate to the mode selected.
8-10 GARP Configuration Menu Screens
Section 8.3.1, except that all ports