Table of Contents
Advertisement
RMON Statistics Screen
Table 10-4 RMON Statistics Screen Field Descriptions (Continued)
Use this field...
65 – 127 Octets
(Read-Only)
128 – 255 Octets
(Read-Only)
256 – 511 Octets
(Read-Only)
512 – 1023 Octets
(Read-Only)
1024 – 1518 Octets
(Read-Only)
Index [nn]
(Command)
CLEAR
COUNTERS
(Command)
10.4.1 Displaying RMON Statistics
To display the statistics for any index, proceed as follows:
1. Use the arrow keys to highlight the Index [nn] field at the bottom of the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to decrement) the index
number.
3. Press ENTER (neither the RMON Index field nor the statistics will change until ENTER is
pressed).
10-12
Device Statistics Menu Screens
To...
See the total number of frames, including bad frames, received that
were between 65 and 127 bytes in length (excluding framing bits, but
including FCS bytes).
See the total number of frames, including bad frames, received that
were between 128 and 255 bytes in length (excluding framing bits, but
including FCS bytes).
See the total number of frames, including bad frames, received that
were between 256 and 511 bytes in length (excluding framing bits, but
including FCS bytes).
See the total number of frames, including bad frames, received that
were between 512 and 1023 bytes in length (excluding framing bits,
but including FCS bytes).
See the total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding framing bits,
but including FCS bytes).
Enter an index number for viewing statistics. For instructions on how
to use this command, refer to
Temporarily reset all counters of a screen to zero to allow the user to
observe counter activity over a period of time. For details on how to use
this command, refer to
Section
10.4.1.
Section
3.1.4.
Advertisement
Table of Contents
