Brasilia OPUS Technical Manual page 34

OPTIONAL HYPERWAND:
TEMPERATURE ADJUSTMENT:
Temperature is directly programmed by a multifunction display and its value is included between
60°C min and 90°C max. See "Versions with display and Hyperwand" - "Programming" - "Autosteamer
Temperature".
AIR INLET ADJUSTMENT:
During installation, check that 5 mm. gicleur, placed on Hyperwand, is suitable for the type of
used milk. For a perfect cappuccino, every machine is endowed with other two types of gicleur (4
and 6 mm) and related pipe. The technician must verify what is the gicleur to use, in accordance
with the milk type.
WARNING: programming should be performed by authorized service agent/technician ONLY.
Pict.2
1) Press the STOP-key of the group to be programmed and then, without releasing the STOP, press the CONT push-button (n°1). Entry
to the programming status is shown by the simultaneous blinking of the 4 dose LED's (n°2,3,5,6) and the programming-LED on the key-
pad of the group being programmed.
2) Press the delivery push-button for the dose that is to be programmed. The LED for the dose being programmed will remain alight and
the programming-LED will be blinking.
3) Press the STOP of that group when the coffee has reached the required level in the cup and the dose will be stored in memory.
Other doses can be programmed in the same way, the only difference being the key to be pressed.
4) Press STOP again to exit from the programming status.
1) Press the STOP-key of the first group and then, without releasing the STOP, press the CONT push-button (n°1).
Entry to the programming status is shown by the simultaneous blinking of the 4 dose LED's (n°2-3-5-6) and the programming-LED
(n°4) on the keypad of the group being programmed.
2) Press push-button 2. The LED relative to the key 2, together with the programming-LED (n°4), will remain alight and the brewing cof-
fee starts.
3) Press the STOP key when the coffee has reached the required level in the cup and the dose will be stored in memory. The LED rela-
tive to the key 2 lights off while the others LED (n° 3-5-6) and the programming-LED begin to blink.
To program the doses relative to the keys 3,5,6, follow the instructions as per points 2) - 3).
4) Press STOP again to exit from the programming status.
REV. 2 04/2007
5. DIGIT AUTOMATIC VERSION PROGRAMMING
TOUCH KEY PAD DESCRIPTION
1 = LED of CONT key (continuous delivery)
2 = LED of ESPRESSO COFFEE dose key
3 = LED of DOUBLE ESPRESSO dose key
4 = LED of STOP/Programming key
5 = LED of COFFEE dose key
6 = LED of DOUBLE COFFEE dose key
5.A. 1 GROUP MODELS
5.B. 2-3-4 GROUPS MODELS
- green LED
- green LED
- green/orange LED
- green LED
- green LED
1° GROUP
ENGLISH - 9