Power Supply Unit - Furuno FAR-3320SW Installation Manual

2. WIRING
2.5

Power Supply Unit

Wire the unit as shown below. See the interconnection diagram for details.
• PSU-014: For FAR-3220W
• PSU-015: For FAR-3330SW
Fuse holder
1. Unfasten five screws to open the cover of the power supply unit.
2. Unfasten four screws from the cable clamp to separate the cable clamp assembly.
3. Pass the LAN cable of the antenna cable and serial cable through the cable
clamp.
1. Insert the cable. 1. Insert the cable.
2-36
PSU-014
Fan
Cable clamp
Cable clamp
2. Pass the cable 2. Pass the cable
to next lane. to next lane.
LAN cable
PSU-015
Fuse holder (2 pcs.)
Set the cable. Set the cable.
Serial cable
Fan